Violin SE

SPECIFICATION

DESIGN:

2-way vented-box

FREQUENCY RESPONSE:

35Hz-40kHz

SENSITIVITY (2.83V/1M):

88dB

IMPEDANCE:

8 ohms (minimum 6.4 ohms)

POWER REQUIREMENT:

30-150W recommended

Tweeter:

Air Motion Tweeter, field-replaceable diaphragm, Size (LW):25mm×120mm

Rear Firing Tweeter:

Purified field-replaceable aluminum ribbon tweeter, Size(LWT):60mm×8.5mm×0.01mm. High power handling, high output, shielded design.

Midwoofer:

1×200mm (8″). Aluminum frame, the sandwich cone of Non-woven

carbon fiber+Cell+Non-woven carbon fiber, 50mm (2″) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y30 Ferrite magnet.

Crossover Frequency:

2kHz and 9kHz

Crossover’s Attenuation Slope:

Woofer -12dB, Tweeter -18dB,

Rear firing tweeter -12 dB

Crossover Components:

High quality MKP capacitors. Also, high purified OFC, inductors and the metal oxide film resistors with military industrial standard.

Connective Cable:

Teflon insulated OCC cable

Connections:

2 pcs connectors

Cabinet Material:

High quality MDF

Speaker (HWD) / Weight:

81x26x40cm / 19.5kgs per pc

Stand (HWD) / Weight:

42x35x43cm / 7kg

Wooden case (HWD) / weight:

58x40x47cm / 17Kg

勞倫斯

©Lawrence Audio // All Rights Reserved